| Delta Virtual Airlines Water Cooler | PC Support |
AMD CPU 3.7 |
DVA6102
Captain, B757-200
Joined on July 01 2008
Century Club
"MATH!!!"
Pasadena, TX
153 legs, 209.0 hours
10 legs,
15.1 hours online
131 legs,
183.0 hours ACARS
3 legs,
5.0 hours event
|
Posted onPost created on
April 16 2012 20:55 ET by Naren Manoj
|
Hey all,
My AMD Phenom x2 1090T is running at 3.7 Ghz. With a bunch of tweaks (and a 460 GTX card 1GB running at 710 mhz), I'm still getting 6 fps when I'm at airports like ATL, JFK, EWR, LAX, etc. Any help on what I can do to bump my fps up?
Thanks,
Naren
|
DVA6102
Captain, B757-200
Joined on July 01 2008
Century Club
"MATH!!!"
Pasadena, TX
153 legs, 209.0 hours
10 legs,
15.1 hours online
131 legs,
183.0 hours ACARS
3 legs,
5.0 hours event
|
Posted onPost created on
April 16 2012 21:20 ET by Naren Manoj
|
Btw, my VCORE is 1.448 Volts. Any help on changing this would be nice as well.
|
DVA5255
First Officer, A330-300
Joined on November 17 2007
Western United States
31 legs, 54.8 hours
15 legs,
18.7 hours ACARS
|
Posted onPost created on
April 17 2012 16:31 ET by Louis Vanbelkum
|
I am running a 8120 at 4.1 or 4.7 dependent on how much i feel like pushing it but mostly 4.1 and it is pretty good.
What kind of cooling are you running? If any kind of liquid whats the temp around the room.
|
DVA6102
Captain, B757-200
Joined on July 01 2008
Century Club
"MATH!!!"
Pasadena, TX
153 legs, 209.0 hours
10 legs,
15.1 hours online
131 legs,
183.0 hours ACARS
3 legs,
5.0 hours event
|
Posted onPost created on
April 21 2012 18:46 ET by Naren Manoj
|
Running a Hyper TX3 air cooler always at 100% and I'm able to keep my 3.7 GHz at under 45 Celsius
|
DVA5255
First Officer, A330-300
Joined on November 17 2007
Western United States
31 legs, 54.8 hours
15 legs,
18.7 hours ACARS
|
Posted onPost created on
April 22 2012 20:27 ET by Louis Vanbelkum
|
your good until over 70Celsius
do a bump to 4.1 Gz
after some research online i found this
4.1Gz w/multiplier 19.5
210.8Mhz bus speed
1.464 Voltage
no guaranties it may require you to do a small voltage bump maybe not, every chip is a little different
gl if you find that you can't boot (been there) see if your mobo has a clear c mos it not i just unplug the computers psu from the mobo and let it sit for an hour and it normally clears after a bad OC and you should boot in the normal speed
|
DVA6102
Captain, B757-200
Joined on July 01 2008
Century Club
"MATH!!!"
Pasadena, TX
153 legs, 209.0 hours
10 legs,
15.1 hours online
131 legs,
183.0 hours ACARS
3 legs,
5.0 hours event
|
Posted onPost created on
April 22 2012 21:31 ET by Naren Manoj
|
Thanks! will try this over the weekend
|
DVA5255
First Officer, A330-300
Joined on November 17 2007
Western United States
31 legs, 54.8 hours
15 legs,
18.7 hours ACARS
|
Posted onPost created on
April 23 2012 07:14 ET by Louis Vanbelkum
|
tell me how it goes and i can help you fine tune...
i am lucky enough that on the 8120 with just a multiplier change i can go to 4.1Gz with no extra voltage if i wanted
even though i do up it 1 just to make sure it never crashes
|
DVA5255
First Officer, A330-300
Joined on November 17 2007
Western United States
31 legs, 54.8 hours
15 legs,
18.7 hours ACARS
|
Posted onPost created on
April 29 2012 17:53 ET by Louis Vanbelkum
|
| any luck ?
|
DVA9895
First Officer, B767-300
Joined on June 14 2011
Waterville, ME USA
24 legs, 47.4 hours
6 legs,
15.2 hours online
22 legs,
43.5 hours ACARS
3 legs,
6.2 hours event
|
Posted onPost created on
April 29 2012 18:24 ET by Matt Hodgkins
|
They say no news is good news, but in this case.... fried CPU??
|
DVA6102
Captain, B757-200
Joined on July 01 2008
Century Club
"MATH!!!"
Pasadena, TX
153 legs, 209.0 hours
10 legs,
15.1 hours online
131 legs,
183.0 hours ACARS
3 legs,
5.0 hours event
|
Posted onPost created on
April 29 2012 22:45 ET by Naren Manoj
|
LOL... i'm okay. However, since I haven't gotten a whole lot of time to be on the computer (homework, been out of town, etc.), I may have to push this until this week sometime. However, I WAS able to push to 3.9 on my multiplier in my BIOS and get it running stable. Waiting to save for a new power supply, then maybe I can push that CPU to 4.0 GhZ
|
